DESCRIPTION
VG 202 FIBERGLASS SLEEVING FOR CARBON BRUSH
Description
The fiberglass sleeving for carbon brush is a alkali-free fiberglass braided
sleeving coated with acrylic resin. It Possesses excellent flexibility an smooth
cut. It can be used as a cover for the pigtail of a carbon brush.
Length:1000+20(-10)mm.
Appearance
The sleeving is not sticky. There are no lines and blots on the surface
but small pellets may appear due to glass thread sleeving. It’s colour is
black or dark and no any clearly sign of discolouration.
Heat resistance
When it cools down after being kept in a box with a constant temperature
of 130±2’for 24 hours and is wound around the specific mandrel.
It’s coating will not crack.
Twist resistance
When the sleeving is cut and the new end is twisted ten times by
fingers, the crosscut will not get loose by two inter-sections of braid.
Compatibility of wire’s colour: The colour of the wire inserted
inside the sleeving should be compatible with the colour it was uninserted.
Inner Diameter | Wall Thickness | ||
Nominal | Tolerance | Nominal | Tolerance |
1;1.5 | 0.2 | 0.3 | ±0.10 |
-0.1 | |||
2;2.5 | 0.3 | 0.3 | ±0.10 |
-0.1 | |||
3;3.5 | 0.3 | 0.5 | ±0.15 |
-0.1 | |||
4;5;6 | 0.4 | 0.5 | ±0.15 |
-0.2 | |||
7;8;9 | 0.5 | 0.6 | ±0.15 |
-0.3 |
Previous page
Previous page
Recommended Products
Product Consultation
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!