Phenolic Resin Paper Tube for Electrical Insulation
Category: Knowledge
2026-10-27
At Hunan Powerwell Industrial Co., Ltd., we produce the Phenolic resin Paper tube for electrical insulation. The 3520 grade is made from electrical-grade paper impregnated with phenolic resin, then heated, rolled, baked and cured. The result is a laminated tube with mechanical, heat and dielectric properties for use in electrical equipment.
The tube is classified as insulation class E, with a thermostability of 120 C for 24 hours. It is suitable for insulation structural parts in electrical equipment and can be used in humid environments and transformer oils. A thicker wall gives higher electrical strength, so the wall thickness should be chosen for the voltage and the mechanical load.

The standard outer diameter range is 10 to 300 mm, the wall thickness range is 1 to 50 mm, and the standard length is 1000 mm. Special specifications can be customized. The tube is normally supplied in brown or orange, and special colours can be provided on request. Sheet or other forms can also be produced to customer requirements.
For the 3520 grade, the density is at least 1.03 g/cm3 for an inside diameter of 5 to 25 mm and at least 1.10 g/cm3 for an inside diameter above 25 mm. The water absorption for a 3 mm wall is 8 percent or less. Flexural strength is at least 50 MPa for the smaller bore and at least 60 MPa for the larger bore, and the compressive strength follows the same levels.
The insulation system has been approved by UL under number E310670, and the products have passed ROHS and REACH testing. The tube is used in transformers, motors, switches and other electrical equipment. A smooth surface and a consistent wall thickness help the part fit the winding or the structural position. The material is also described as resistant to moisture, which supports use in humid rooms.
For selection, confirm the inside diameter, the outside diameter, the wall thickness, the length and the colour. The working temperature, the voltage and the presence of transformer oil should also be checked. If the tube is used as a structural part, the compressive load and the fixing method should also be considered. Custom sizes are possible, so a drawing or a sample is the best way to confirm the requirement.
Hunan Powerwell Industrial Co., Ltd. is located at 158 Wuyi Road, Changsha, Hunan, China. The team can be reached at market@hnpowerwell.com, +86-731-8229 9698 or +86-731-8224 3908, and on WhatsApp at +86 139 0845 2905. Send the size, the quantity and the application, and we will reply with the available specification and the delivery plan.
Recommended news
Consultation
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!